The HX-7B is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in vertical directivity. Its adopted wave front control technology is ideal for reproducing clear sound in spaces with long reverberation times or high background noise. The HX-7B is designed for indoor use.
The HX-7B-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in vertical directivity. Its adopted wave front control technology is ideal for reproducing clear sound in spaces with long reverberation times or high background noise. The speaker is designed to be installed under the eaves when used outdoors.
The HX-7W is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in vertical directivity. Its adopted wave front control technology is ideal for reproducing clear sound in spaces with long reverberation times or high background noise. The HX-7W is designed for indoor use.
The HX-7W-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in vertical directivity. Its adopted wave front control technology is ideal for reproducing clear sound in spaces with long reverberation times or high background noise. The speaker is designed to be installed under the eaves when used outdoors.
FB-150B เป็นลำโพงซับวูฟเฟอร์ขนาด 15 นิ้ว ถูกออกแบบมาให้ใช้งานร่วมกับ HX-7 หรือลำโพง Full range เหมาะสำหรับใช้งานภายในเพื่อเพิ่มคุณภาพเสียง
FB-150W เป็นลำโพงซับวูฟเฟอร์ขนาด 15 นิ้ว ถูกออกแบบมาให้ใช้งานร่วมกับ HX-7 หรือลำโพง Full range เหมาะสำหรับใช้งานภายในเพื่อเพิ่มคุณภาพเสียง
By using three HY-60DB brackets, the directivity angle mode of the HX-7B can be changed to 60
The FB-152B is a compact, indoor-use subwoofer system employing a high-power 38cm (15") woofer. It is designed for use in conjunction with the TOA's HX-7B or other full range speaker, and is particularly ideal for reproducing dynamic low-frequency sound for both permanent and temporary installations.
By using three HY-60DB-WP brackets, the directivity angle mode of the HX-7B-WP can be changed to 60
By using three HY-60DW brackets, the directivity angle mode of the HX-7W can be changed to 60
By using three HY-60DW-WP brackets, the directivity angle mode of the HX-7W-WP can be changed to 60
The HY-CN7B is used to join 2 HX-7B speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise.
The HY-PF7B is used exclusively to suspend the HX-7B speaker system from the ceiling. The FB-150B Subwoofer can be suspended using this frame and the frame's supplied mounting brackets.
The SR-T5 is a 2-way Line Array speaker in which woofers and tweeters are arranged vertically in close proximity to each another. Its excellent speech clarity makes it ideal for installation in sports facilities with strong reverberation, such as gymnasiums. Sturdy impact-resistant construction allows the speaker to be used as a main speaker in small- or medium-scale indoor sports facilities.
HX-5B เป็นลำโพง Line Array สำเร็จรูปขนาดเล็กแบบ 2 ทาง โดยลำโพง 1 ชุด จะมีตู้ลำโพงย่อย 4 ตู้ย่อยแต่ละตู้สามารถปรับมุมกระจายเสียงได้ เพื่อให้เสียงชัดเจนในพื้นที่ห้องที่มีเสียงก้อง เหมาะกับงานห้องประชุม โรงยิม ห้องจัดเลี้ยง
The HY-PF7W is used exclusively to suspend the HX-7W speaker system from the ceiling. The FB-150W Subwoofer can be suspended using this frame and the frame's supplied mounting brackets.
HX-5W เป็นลำโพง Line Array สำเร็จรูปขนาดเล็กแบบ 2 ทาง โดยลำโพง 1 ชุด จะมีตู้ลำโพงย่อย 4 ตู้ย่อยแต่ละตู้สามารถปรับมุมกระจายเสียงได้ เพื่อให้เสียงชัดเจนในพื้นที่ห้องที่มีเสียงก้อง เหมาะกับงานห้องประชุม โรงยิม ห้องจัดเลี้ยง
FB-120B เป็นลำโพงซับวูฟเฟอร์ขนาด 12 นิ้ว ถูกออกแบบมาให้ใช้งานร่วมกับ HX-5 หรือลำโพง Full range เหมาะสำหรับใช้งานภายในเพื่อเพิ่มคุณภาพเสียง
The HY-ST7 Speaker Stand Adapter is used to mount the HX-7 series Speaker System on a speaker stand.
FB-120W เป็นลำโพงซับวูฟเฟอร์ขนาด 12 นิ้ว ถูกออกแบบมาให้ใช้งานร่วมกับ HX-5 หรือลำโพง Full range เหมาะสำหรับใช้งานภายในเพื่อเพิ่มคุณภาพเสียง
HX-5B-WP เป็นลำโพง Line Array สำเร็จรูปขนาดเล็กแบบ 2 ทาง โดยลำโพง 1 ชุด จะมีตู้ลำโพงย่อย 4 ตู้ย่อยแต่ละตู้สามารถปรับมุมกระจายเสียงได้ เพื่อให้เสียงชัดเจนในพื้นที่ห้องที่มีเสียงก้อง ทนทานต่อทุกสภาวะอากาศด้วย IPX4 เหมาะกับงานห้องประชุม โรงยิม ห้องจัดเลี้ยง
The HY-TM7B-WP Speaker Rigging Bracket is used to suspend the HX-7B-WP Speaker System directly from ceilings, beams or other building structures. This bracket is designed for outdoor use.
The HY-TM7W-WP Speaker Rigging Bracket is used to suspend the HX-7W-WP Speaker System directly from ceilings, beams or other building structures. This bracket is designed for outdoor use.
HX-5W-WP เป็นลำโพง Line Array สำเร็จรูปขนาดเล็กแบบ 2 ทาง โดยลำโพง 1 ชุด จะมีตู้ลำโพงย่อย 4 ตู้ย่อยแต่ละตู้สามารถปรับมุมกระจายเสียงได้ เพื่อให้เสียงชัดเจนในพื้นที่ห้องที่มีเสียงก้อง ทนทานต่อทุกสภาวะอากาศด้วย IPX4 เหมาะกับงานห้องประชุม โรงยิม ห้องจัดเลี้ยง
The MT-200 is a matching transformer for the HX-5 series speaker systems, and can be used both indoors and outdoors.
The HY-VM7B Speaker Rigging Bracket is designed to mount the HX-7B Speaker System to the wall or ceiling by using in combination with the optional mounting bracket. With the use of the HY-VM7B only, the speaker system can be mounted to the ceiling or beams, or suspended from the ceiling by using eyebolts.
The HY-VM7W Speaker Rigging Bracket is designed to mount the HX-7W Speaker System to the wall or ceiling by using in combination with the optional mounting bracket. With the use of the HY-VM7W only, the speaker system can be mounted to the ceiling or beams, or suspended from the ceiling by using eyebolts.
The HY-CN7B-WP is used to join 2 HX-7B-WP speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise. This bracket is designed for outdoor use.
The HY-PF1WP is used exclusively to suspend the HX-5 speaker system from the ceiling. The FB-120 series Subwoofer can be suspended using this frame and the frame's supplied mounting brackets. This bracket is designed for outdoor use.
The HY-CN7W is used to join 2 HX-7W speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise.
The HY-CN7W-WP is used to join 2 HX-7W-WP speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise. This bracket is designed for outdoor use.
The HY-CW1WP is designed to be used exclusively to mount the HX-5 series speaker system to a ceiling. The speaker can be rotated 360゜ horizontally. It can also be tilted vertically up to 82.5゜ when suspended horizontally, and depending on the speaker directivity mode, up to 67.5゜ (for 60゜ mode) or 75゜ (for 15゜, 30゜ or 45゜ mode) when suspended vertically. This bracket is designed for outdoor use.
The HY-MS7B-WP Speaker Wall Mounting Bracket is intended for mounting the HX-7B-WP Speaker System to the wall under outdoor eaves. These brackets also have provision for mounting the MT-200 Matching Transformer directly to this bracket.
The HY-MS7W-WP Speaker Wall Mounting Bracket is intended for mounting the HX-7W-WP Speaker System to the wall under outdoor eaves. These brackets also have provision for mounting the MT-200 Matching Transformer directly to this bracket.
The HY-WM1WP is used exclusively to mount the HX-5 series speaker system to a wall or ceiling. This bracket permits the speaker to be tilted downward up to 20゜ from the horizontal when the speaker is mounted on a wall, or tilted up to 20゜ from the vertical when the speaker is mounted on a ceiling. This bracket is designed for outdoor use.
The HY-WM2WP is used exclusively to mount the HX-5 series speaker system closely to a wall or ceiling. The bracket helps to achieve clearer sound reproduction by minimizing phase interference generated by sound waves reflecting from walls or ceilings. This bracket is designed for outdoor use.
The HY-MT7 Matching Transformer Adapter is designed to mount the MT-200 Matching Transformer to the HX-7 Series Speaker System. It comes in a set of 2 pieces.
The HY-CN1B-WP is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise. This bracket is designed for outdoor use.
The HY-PF1W is used exclusively to suspend the HX-5 speaker system from the ceiling. The FB-120 series Subwoofer can be suspended using this frame and the frame's supplied mounting brackets. This bracket is designed for indoor use.
The HY-CW1B is designed to be used exclusively to mount the HX-5 series speaker system to a ceiling. The speaker can be rotated 360゜ horizontally. It can also be tilted vertically up to 82.5゜ when suspended horizontally, and depending on the speaker directivity mode, up to 67.5゜ (for 60゜ mode) or 75゜ (for 15゜, 30゜ or 45゜ mode) when suspended vertically. This bracket is designed for indoor use.
The HY-CW1W is designed to be used exclusively to mount the HX-5 series speaker system to a ceiling. The speaker can be rotated 360゜ horizontally. It can also be tilted vertically up to 82.5゜ when suspended horizontally, and depending on the speaker directivity mode, up to 67.5゜ (for 60゜ mode) or 75゜ (for 15゜, 30゜ or 45゜ mode) when suspended vertically. This bracket is designed for indoor use.
The HY-WM1B is used exclusively to mount the HX-5 series speaker system to a wall or ceiling. This bracket permits the speaker to be tilted downward up to 20゜ from the horizontal when the speaker is mounted on a wall, or tilted up to 20゜ from the vertical when the speaker is mounted on a ceiling. This bracket is designed for indoor use.
The HY-CN1W-WP is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise. This bracket is designed for outdoor use.
The HY-WM2B is used exclusively to mount the HX-5 series speaker system closely to a wall or ceiling. The bracket helps to achieve clearer sound reproduction by minimizing phase interference generated by sound waves reflecting from walls or ceilings. This bracket is designed for indoor use.
The HY-WM1W is used exclusively to mount the HX-5 series speaker system to a wall or ceiling. This bracket permits the speaker to be tilted downward up to 20゜ from the horizontal when the speaker is mounted on a wall, or tilted up to 20゜ from the vertical when the speaker is mounted on a ceiling. This bracket is designed for indoor use.
The HY-WM7B Speaker Wall Mounting Bracket is intended for mounting the HX-7B Speaker System to the wall by using in combination with the optional HY-VM7B Speaker Rigging Bracket.
The HY-WM2W is used exclusively to mount the HX-5 series speaker system closely to a wall or ceiling. The bracket helps to achieve clearer sound reproduction by minimizing phase interference generated by sound waves reflecting from walls or ceilings. This bracket is designed for indoor use.
The HY-WM7W Speaker Wall Mounting Bracket is intended for mounting the HX-7W Speaker System to the wall by using in combination with the optional HY-VM7W Speaker Rigging Bracket.
The HY-CN1B is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise. This bracket is designed for indoor use.
The HY-CN1W is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise. This bracket is designed for indoor use.
The HY-PF1B is used exclusively to suspend the HX-5 speaker system from the ceiling. The FB-120 series Subwoofer can be suspended using this frame and the frame's supplied mounting brackets. This bracket is designed for indoor use.
The HY-ST1 Speaker Stand Adapter is used exclusively to mount the HX-5 series speaker system on the speaker stand. The HY-ST1 fits the ST-32 Speaker Stand or other stands with mounting pipe of 35 mm in diameter.
