VX-2000 Series

VX-2000 System Manager

VX-2000 System Manager

VX-2000

The VX-2000 System Manager is an input matrix unit that assigns input signals to 4 audio buses, and functions as the VX-2000 system's main controller. A total of up to 8 units of the VX-200XI, VX-200XR, and 900 Series input modules can be mounted in a System Manager. The VX-2000 can control audio signal routing, priorities, and peripheral equipment, while input and output control settings are performed by way of a PC. Up to 2,000 system events and failures can also be recorded, and the log can be viewed from a PC.

VX-2000DS Emergency Power Supply (301H Version)

VX-2000DS Emergency Power Supply (301H Version)

VX-2000DS 301H

The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.

VX-200PS Power Supply Unit (H Version)

VX-200PS Power Supply Unit (H Version)

VX-200PS H

The VX-200PS Power Supply Unit is mounted in the VX-2000PF Power Supply Frame when in use. There are 2 DC output channels per unit. Use the VX-200PS in the number suited to the required total system power.

VX-2000PF Power Supply Frame

VX-2000PF Power Supply Frame

VX-2000PF

The VX-2000PF permits the VX-200PS Power Supply Unit to be mounted in an equipment rack. Up to 3 VX-200PS units can be installed in the unit.

VX-2000SF Surveillance Frame

VX-2000SF Surveillance Frame

VX-2000SF

The VX-2000SF Surveillance Frame is the output matrix section of the VX-2000 system that assigns audio signals to individual zones from 4 audio buses. It can be extended to up to 8 units. A total of 10 units of output modules and control modules can be installed per VX-2000SF. The following 6 types of modules can be used: the VX-200SP Pilot Tone Detection module, the VX-200SP-2 Pilot Tone Detection module (End of Line), the VX-200SZ Impedance Detection module, the VX-200SZ-2 Impedance Detection module, the VX-200SI Control Input module, and the VX-200SO Control Output module.

RM-200XF Fireman's Microphone

RM-200XF Fireman's Microphone

RM-200XF

A dedicated microphone for the VX-2000 system, the RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general-purpose broadcast applications as well.

RM-200X Remote Microphone

RM-200X Remote Microphone

RM-200X

The RM-200X is a dedicated unit for the VX-2000 system, and permits emergency broadcast as well as general-purpose broadcast.

VP-3154 Digital Power Amplifier 4X150W

VP-3154 Digital Power Amplifier 4X150W

VP-3154

The VP-3154 is an Digital Power Amplifier used for the SX-2000, VX-2000 systems. It is a 2U rack-mount unit equipped with 4 channels of class-D digital power amplifiers, which contribute to energy-saving and lightweight design. The VP-3154 also features a front-mounted LED indicator for operating status indication and stand-by mode to be set for reducing stand-by power consumption. It requires a dedicated power supply unit VX-3000DS or VX-3150DS.

VP-3304 Digital Power Amplifier 4X300W

VP-3304 Digital Power Amplifier 4X300W

VP-3304

The VP-3304 is an Digital Power Amplifier used for the SX-2000, VX-2000 and VM-3000 systems. It is a 2U rack-mount unit equipped with 4 channels of class-D digital power amplifiers, which contribute to energy-saving and lightweight design. The VP-3304 also features a front-mounted LED indicator for operating status indication and stand-by mode to be set for reducing stand-by power consumption. It requires a dedicated power supply unit VX-3000DS or VX-3150DS.

VP-3504 Digital Power Amplifier 4X500W

VP-3504 Digital Power Amplifier 4X500W

VP-3504

The VP-3504 is an Digital Power Amplifier used for the SX-2000, VX-2000 and VM-3000 systems. It is a 2U rack-mount unit equipped with 4 channels of class-D digital power amplifiers, which contribute to energy-saving and lightweight design. The VP-3504 also features a front-mounted LED indicator for operating status indication and stand-by mode to be set for reducing stand-by power consumption. It requires a dedicated power supply unit VX-3000DS or VX-3150DS.

VP-200VX Power Amplifier Input Module

VP-200VX Power Amplifier Input Module

VP-200VX

The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with the VP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.

VP-2064 Power Amplifier

VP-2064 Power Amplifier

VP-2064

The VP-2064 Power Amplifier features a 60 W-by-4 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

VP-2122 Power Amplifier

VP-2122 Power Amplifier

VP-2122

The VP-2122 Power Amplifier features a 120 W-by-2 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

VP-2241 Power Amplifier

VP-2241 Power Amplifier

VP-2241

The VP-2241 Power Amplifier features a 240 W-by-1 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

VP-2421 Power Amplifier

VP-2421 Power Amplifier

VP-2421

The VP-2421 Power Amplifier features a 420 W-by-1 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

VX-200SE Equalizer Card

VX-200SE Equalizer Card

VX-200SE

The VX-200SE Equaliser is a 9-band, 1-channel equaliser to be mounted on the circuit board of the VX-200SP Pilot Tone Detection module or VX-200SZ Impedance Detection module.

VX-200SI Control Input Module

VX-200SI Control Input Module

VX-200SI

TOA's VX-200SI Control Input Module is used to increase the number of control inputs to be used in the VX-2000 system. It features 16 control inputs and is mounted in the VX-2000SF Surveillance Frame.

VX-200SO Control Output Module

VX-200SO Control Output Module

VX-200SO

TOA's VX-200SO Control Output Module is used to increase the number of control outputs to be used in the VX-2000 system. It features 16 control outputs and is mounted in the VX-2000SF Surveillance Frame.

VX-200SP Pilot Tone Detection Module

VX-200SP Pilot Tone Detection Module

VX-200SP

The VX-200SP is an audio signal output module of the VX-2000 system with speaker line pilot tone detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by monitoring for the presence of a pilot signal, and ground fault.

VX-200SZ Impedance Detection Module

VX-200SZ Impedance Detection Module

VX-200SZ

The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing impedance readings, and ground fault.

VX-200SZ-2 Impedance Detection Module

VX-200SZ-2 Impedance Detection Module

VX-200SZ-2

The VX-200SZ-2 is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing impedance readings, and ground fault. Since the module is equipped with 2 speaker outputs (A and B), broadcasts can be maintained even if one of the two outputs fails. Failures are indicated by the LED on the panel.

VX-200XI Audio Input Module with Control Input

VX-200XI Audio Input Module with Control Input

VX-200XI

The VX-200XI module is designed to be used in conjunction with the VX-2000 System Manager, and comes with control input terminals, low-cut and high-cut filters, and gain controls.

VX-200XR Remote Microphone Input Module

VX-200XR Remote Microphone Input Module

VX-200XR

The VX-200XR module is designed to be used with the RM-200X Remote Microphone or RM-200XF Fireman's Microphone. Insert one of these modules into the VX-2000's input module slot for each remote or fire microphone used in the system.

EV-200M Voice Announcement Board

EV-200M Voice Announcement Board

EV-200M

The EV-200M is a playback-only Voice Announcing board to play back the messages recorded on The EV-350R. The EV-200M is designed to be built in the VM-2000 series amplifiers and VX-2000 system.

Scroll to top